Do treści strony

beyerdynamic Headphone Adapter Screw M5

4.6 na 5 gwiazdek z 117 ocen klientów

Screw Adapter

  • From 3.5 mm with M5 thread to 6.3 mm
  • Suitable for Beyerdynamic DT-880 Edition/ DT-990 Edition and DT-770 Pro/ DT-990 Pro headphones from version summer 2019 (these have a M5 thread on the 3.5 mm jack plug)
  • Produkt dostępny od Listopad 2019
  • Numer artykułu 479207
  • Jednostka sprzedaży 1 szt.
  • 19,30 zł
    Ceny z podatkiem VAT
    Dostępny w magazynie
    Dostępny w magazynie

    Produkt jest dostępny w magazynie.

    Informacje dotyczące wysyłki
    1

    117 Oceny klientów

    4.6 / 5

    Aby wystawić opinię, należy się zalogować.

    Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

    Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

    montaż

    wykończenie

    55 Opinie

    m
    PERFECT
    mik29 31.03.2024
    The product has no defects, everything is correct. Fast shipping :)
    montaż
    wykończenie
    0
    0
    Zgłoś nadużycie

    Zgłoś nadużycie

    google translate gb
    Wystąpił błąd. Proszę spróbować później.
    t
    Works fine for 5mm threads...
    tomkd 09.03.2021
    ... just be aware vintage Beyerdynamic gear had 8mm threads, so make sure you order the right one! Change happened round 2019. For the newer products with 5mm thread this adapter will do perfectly fine, quality is good!
    And a message to Beyerdynamic: I much preferred the older 8mm thread, which is studio standard somehow (used by Sony, Sennheiser, Audio Technica...)! Hence just 3 stars for handling...
    montaż
    wykończenie
    5
    0
    Zgłoś nadużycie

    Zgłoś nadużycie

    google translate gb
    Wystąpił błąd. Proszę spróbować później.
    J
    The adapter was "mono"
    Jorge. 29.03.2021
    I guess these things can happen, I lost my adapter and was looking for a replacement, when I inserted it into my 880PRO there was no way to pan it, it was always audible on both sides, so I returned it.
    montaż
    wykończenie
    4
    1
    Zgłoś nadużycie

    Zgłoś nadużycie

    google translate gb
    Wystąpił błąd. Proszę spróbować później.
    s
    If you get faulty adapter, this one works best!
    stellars 20.10.2024
    Works perfect with DT770Pro !
    My previous adapter that was included with headphones, started to have weird error - whenever it was screwed till the end, I heard only mono signal - so to get the stereo, adapter needed to be 'loose', not screw till the end. I've ordered this M5 and works perfectly, when screwed tightly. Totally recommend. Just make sure it fits into your cans, as Beyer changed some stuff during years with connector dimension (jack plug)!
    montaż
    wykończenie
    0
    0
    Zgłoś nadużycie

    Zgłoś nadużycie