Do treści strony

Rack Case

  • Size: 6 U
  • 19" Rack mounts front and rear
  • Installation depth: 368 mm
  • Heavy duty butterfly catches
  • Very lightweight construction
  • External dimensions: 445 x 546 x 330 mm
  • Interior dimensions: 311 x 483 x 267 mm
  • Weight: 5.9 kg
  • Suitable replacement screw: Article no. 449210 (not included)
  • Produkt dostępny od Wrzesień 2008
  • Numer artykułu 212526
  • Jednostka sprzedaży 1 szt.
  • Formfactor 19"
  • Construction Type Double-Door
  • Vertical Height Units 6 U
  • Internal Depht [mm] 290 mm
  • Horizontal Height Units 0 U
  • with display stand No
  • Rack rail at the back Yes
  • Service flap No
  • With Wheels No
  • Trolley No
  • Shock Mount No
  • Clasps Butterfly
  • Material Plastic
  • Colour Black
  • External Width 546 mm
  • External Height [mm] 444 mm
  • External Depht [mm] 330 mm
  • Weight 6 kg
545 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

141 Oceny klientów

4.5 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

stabilność

montaż

wykończenie

84 Opinie

R
Dobra skrzynia na stage racki
RafalLEE 09.10.2020
dobry case na stage racki. Zamki mogły by być mocniejsze ale tak poza tym jestem bardzo z niego zadowolony. Przede wszystkim jest lekki i kompaktowy co dla mnie jest najważniejsze gdy pakuję się do małego samochodu.
stabilność
montaż
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
A
Nice compact case
Andris 22.11.2018
It may not be up to extremely heavy duty "pro" standards, but still enough for more casual, "civilian" use.

I need occasionally to transport and/or store some of my gear. And often those are quite sensitive but heavy, mostly old-school analog pieces, so need to be handled with care anyway, so extreme sturdiness is not needed.

One of the main selling points of this Gator range for me was its intermediate size internal 360mm depth. Might seem like a small difference to say a 420mm case, but when you need to actually lift such case fitted full with front-heavy gear, the advantage of better center of gravity is instantly obvious.

So usually I take it out, dust it off, open the lids, connect, and off you go with a session.

So at least for my particular use cases it performs nicely.

The only minor complaint I would have, is the lack of odd HE sizes, like 5HE, 7HE, etc, when sometimes you either need that extra 1HE for ventilation, or the opposite, need to get as compact as possible.

But that criticism also pertains to other molded (not custom plywood) case manufacturers.
stabilność
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
KV
Pretty good!
Kyriakos V. 05.07.2021
Well it's a lightweight rack.

Nothing too flashy or bomb-proof. Plastics are of good quality, no warping, the lids close nicely and firmly. Love the shallow depth as it makes a world of difference in how evenly weight is distributed. Also looks great on a guitar cab.

As others have noted, the rails system leaves a lot to be desired as it's pretty much threaded steel blades that are held in place with the devices you rack on. Works ok, but takes a bit of extra care to get alignments right. Pro-tip, screw everything you need loosely on the rack, align to perfection and screw tight.

All in all, a solid choice for the money.
stabilność
montaż
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
K
Light, simple and relatively cheap.
Koesbeenian 10.11.2020
Light, simple and relatively cheap.
I don't want to carry 16mm plywood cases. This is good enough. And when I'm performing for 20.000 people I buy myself the plywood cases for someone else to carry.
stabilność
montaż
wykończenie
1
0
Zgłoś nadużycie

Zgłoś nadużycie