Do treści strony

Pasywny rozdzielacz kabli

  • Z gniazda RJ 45 do 4 x XLR 3-biegunowy (męski)
  • Analogowy rozdzielacz, który zamiast 4-kanałowych multiscorów używa 4 pary żył + ekran kabla internetowego, aby wysłać 4 analogowe sygnały z A do B.
  • Kompatybilny z każdym ekranowanym kablem internetowym z wtykiem RJ-45 lub Ethercon o każdej długości
  • Do użytku również dla DMX
  • Wymiary: 48 x 110 x 40 cm
  • Waga: 400 g
  • Kompatybilny z wszystkimi produktami serii The sssnake Cat Snake
  • Produkt dostępny od Wrzesień 2019
  • Numer artykułu 465522
  • Jednostka sprzedaży 1 szt.
  • Design Box
  • Distribution Type 1in4
  • RJ45 connection female
  • Number of RJ45 connections 1
  • Signal Connection 3-pin XLR male
  • Number of Signal Connectors 4
  • Connector in RJ45 female
  • Connection out XLR 3-pin male
122 zł
Ceny z podatkiem VAT
Dostępny w magazynie
Dostępny w magazynie

Produkt jest dostępny w magazynie.

Informacje dotyczące wysyłki
1

231 Oceny klientów

4.9 / 5

Aby wystawić opinię, należy się zalogować.

Informacja: Aby opinie na temat sprzętu umieszczane na naszej stronie pochodziły jedynie od osób mających styczność z danym artykułem, umożliwiamy wystawianie ocen jedynie naszym klientom.

Opinie można wystawiać po zalogowaniu się w centrum klienta, używając opcji "wystaw opinię".

wykończenie

111 Opinie

f
Ułatwia życie!
flytech 29.12.2024
Jest świetny. Działa jak powinien, nie ma problemów z Phantom 48V, działa też jako AES/EBU.
Obudowa na pierwszy rzut wydaje się za duża, ale chyba wiele osób zapomina o możliwości przykręcenia jej małymi wkrętami w środku case i na stałe zamontowanie przy bazach mikrofonów bezprzewodowych czy IEM by później łączyć wszystkie urządzenia w kilka sekund.
Szczerze polecam, są świetne.
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
t
Good but needs numbering to correspond to 3FB.
thelxman 21.11.2020
A good little box for collecting (say) your mic tails together. Used to collect up some stage mics tails to route to where the S16 digital snake box is positioned.

Metal chassis, but not Neutrik connectors at this price point.

I had to label it up to match the numbering on the partnered 3FB breakout box. The tails are coloured on this product but numbered on the 3FB, so to know which-is-which you'll have to add your own number labelling to the tails. Maybe Thomann could take this requirement as a product revision.
wykończenie
8
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
h
These things are life changing.
heyimdan-dan 10.11.2023
At first it just seems like a great idea, but the more I used these the more it just made sense. Less clutter on stage, less mess, everything is far more organised, I even run these out of a 4-way rack DI on stage so a single cat5 is all it takes to get the signal where it needs to be. Same with the outputs from the crossover to the amps, it just makes sense! I’ve even been able to use these in situations where I needed to be creative transferring DMX with AES/EBU and two channels of analog audio.

There are lots of options available here and I’m grateful that this stuff just works without any loss in signal quality. It’s worth watching Dave Rat’s stuff online to see how much efficiently cat5 transfers audio over long distances compared to standard mic cable. I’m astonished cat5 with audio didn’t happen sooner, it just makes sense!
wykończenie
2
0
Zgłoś nadużycie

Zgłoś nadużycie

google translate gb
Wystąpił błąd. Proszę spróbować później.
YL
Good quality for a low price
Your Local Technician 27.05.2025
Works as its used to, overall good quality and easy to use
wykończenie
0
0
Zgłoś nadużycie

Zgłoś nadużycie